internetSettings

Within an installation, the internetSettings sub-section describes information for the internet connections. If no information is provided, when an instance is provisioned from the machine image, the basic option is setup with one Ethernet card with dhcp configured.

If you are using JSON, the following is an example with multi-nics setup:

      {
"stack" : {
  "name" : "MyTemplate",
  "version" : "1.0",
  "installation" : {
    "internetSettings" : "configure",
    "nics" : [
      {
        "name" : "nic_1",
        "type" : "ETHERNET",
        "order" : 1,
        "autoConnect" : "true",
        "ipv4" : "dhcp",
        "ipv6" : "disabled"
      },
      {
        "name" : "nic_2",
        "type" : "ETHERNET",
        "order" : 2,
        "autoConnect" : "true",
        "ipv4" : "static",
        "ipv6" : "disabled",
        "ipAddresses" : [
          {
            "version" : 4,
            "address" : "10.0.0.111",
            "netmask" : "255.255.255.0",
            "gateway" : "10.0.0.1"
          }
        ]
      }
    ],
    "diskSize" : 12288,
    "swapSize" : 512
  },
  "os" : {
    "name" : "CentOS",
    "version" : "7",
    "arch" : "x86_64",
    "profile" : "Minimal"
  }

The valid keys to use within internetSettings are:

• basic: one Ethernet card with dhcp configured.
• ask: ask during installation.
• configure: nics to be configured in the template. If no nics definitions found in the json or yaml file, will get a bad request error.
• no value: considered as basic.

Sub-sections

The internetSettings sub-sections are:

• nics