nics

The following is a list of all the accepted values that can be used for the internet settings mode in an installation sub-section of the stack.

For example:

  "installation" : {
"internetSettings" : "configure",
"nics" : [
  {
    "name" : "nic_1",
    "type" : "ETHERNET",
    "order" : 1,
    "autoConnect" : "true",
    "ipv4" : "dhcp",
    "ipv6" : "disabled"
  },
  {
    "name" : "nic_2",
    "type" : "ETHERNET",
    "order" : 2,
    "autoConnect" : "true",
    "ipv4" : "static",
    "ipv6" : "disabled",
    "ipAddresses" : [
      {
        "version" : 4,
        "address" : "10.0.0.111",
        "netmask" : "255.255.255.0",
        "gateway" : "10.0.0.1"
      }
  • nics: list of nics objects, each nic has:
    • name: connection name.
    • type: nic type only “Ethernet” supported for now.
    • order(optional): nic’s order (1,2,3,…) if all nics do not have order their order in the list will be taken.
    • autoConnect: true/false. optional field default value (true).
    • ipv4: ipv4 method [dhcp/static/disabled]
    • ipv6: ipv6 method [dhcp/static/disabled]
    • ipAddresses: list of ip addresses, each ipAddress has:
      • version: IP version 4 / 6
      • address: the ip address
      • netmask: the network mask
      • gateway: the gateway